Wednesday, September 4, 2019

Iron on vinyl on a mug

Let's talk about personalizing coffee mugs.  I was all excited to try some heat transfer ink pens that I got on Amazon with my mug press.  I tried them with regular copy paper (per the directions on the packaging) and with some sublimation paper I had samples of.  Neither one worked so I am going to have to go back to the drawing board on the pens. 

Then I did a search for information on using iron on vinyl on coffee mugs, since I had plenty of iron vinyl in the house.  I found several people that had tried it, and it worked so I thought what the heck, it can't go any worse than the heat transfer ink pens I used.


Here is what I really liked about using the iron on vinyl for the mugs . . . 
  • You don't have to have perfect coloring skills, like you need with the ink pens
  • You don't need heat resistant tape to stick and hold the design on the mug since the carrier sheet for the iron on vinyl is already sticky
I cut the image with my Cricut on the iron on setting.

I used my PlanetFlame mug press which can be found at https://www.amazon.com/dp/B07J4FKV5R/
I pressed it at 360 degrees for 190 seconds.  Remember to use a towel or hot pad when you remove the mug from the press.  It will be hot!


One I took it out of the press, I let it cool completely before removing the carrier sheet.  The slight purple bleed that you see under the image is left over from my attempt at the heat transfer inks.


I would hand wash a mug with iron on vinyl on it, because the heat of the dishwasher could re-activate the vinyl.  This is also why I recommend air drying shirts with iron on vinyl on them. Keep following me and join my Teach Me Cricut Design Space group on Facebook!

Thanks!
Shawn's Teach me Cricut Design Space Group
Crafty Chic's Blog on Facebook //  YouTube  // Instagram  //  Crafting Pixie

No comments:

Post a Comment